Appendix – MEGA Corp. MES34-OPS-1 User Manual
Page 33
MES34-OPS-1
21 Feb 2014
SECTION 6
Appendix
6-10
MES34-OPS(CL)-1
21 Feb 2014
machine is not equipped with a retarder control,
use the service brake control to reduce engine
overspeed when you are going downhill. Never
coast the machine.
AFTER OPERATIONS
Perform these procedures after the end of the shift
or end of the day. These steps are in addition to and
do not replace the CAT631G after operation
requirements established in the Operation and
Maintenance Manual.
1. Machine – STOPPED
2. Parking Brake – APPLIED
3. Gear Shift Lever - NEUTRAL
4. Engine – OFF
5. Inspect the engine compartment for debris.
Clean out any debris in order to avoid a fire
hazard.
6. Remove all flammable debris from the front
bottom guard through the access doors in order
to reduce a fire hazard. Discard the debris
properly.
N-9