MEGA Corp. MES34-OPS-1 - Manual (Page 26)

MES34-OPS-1
21 Feb 2014
SECTION 6
Appendix
6-3
MES34-OPS(CL)-1
21 Feb 2014
BEFORE OPERATIONS
These procedures are used to perform a walk-around
inspection of the MES34 before use or beginning of
the shift. This inspection is in addition to and does
not replace the CAT 631G tractor inspection
requirements found in the 631G Operation &
Maintenance Manuals.
1. Chocks – As Required
2. Vehicle Parking Brake – ON
3. Gear Selector Lever – “N” Neutral
4. Cab Control Switches – SET AS REQUIRED
5. Cab Windows – DAMAGE AND CLEANLINESS
6. LH Tractor – DAMAGE, SECURITY AND LEAKS.
7. Front of Tractor – DAMAGE, SECURITY AND
LEAKS.
8. Machine Kill Switch – OFF
9. Hydraulic Reservoir Level – CHECKED
10. Machine Lock-out Switch - ON
N-2