Appendix – MEGA Corp. MES34-OPS-1 User Manual
Page 31
MES34-OPS-1
21 Feb 2014
SECTION 6
Appendix
6-8
MES34-OPS(CL)-1
21 Feb 2014
the area is clear before you operate the machine
in the REVERSE position.
The cushion-hitch should be turned on at all
times except when you are loading materials or
when you are dumping materials. When the
cushion-hitch is turned OFF, depth of cuts will be
more even and material will spread more
smoothly during unloading. This will help you to
achieve faster cycle times.
The elevator does not need to be running when
you are unloading fine material.
Reduce engine speed when you maneuver in
tight quarters or when you are going over a hill.
Select the appropriate travel speed before you
begin to drive the machine downhill. Do not shift
the transmission control while you are going
downhill.
N-7