MBM Corporation MBM 256 LS Folder - Manual (Page 19)

17
Rev. 03/05
Operating Manual Standard Folds
To move the indicator to the desired fold posi-
tion, rotate the latch (15) up to the stop lever
(14) and slide the stop lever up or down the
table. The indicator will move with it.
Rotate the latch down to lock the lever and
indicator in place.
Length Adjustments –
After Initial Settings
Fine adjustment of the fold length is accom-
plished with the fine adjustment knob (16).
When adjusting fold length with this control,
at least one full rotation of the knob will be
required to make a noticeable change.
To make fine adjustments in the fold length:
1. Evaluate whether the first fold needs to be
nearer to the leading edge of the sheet or
further away from it. Then, evaluate
whether the second fold needs to be nearer
to the first fold or further away from it. (See
page 17 for fold sequences.)
2. Turn the fine adjustment knob (16) in the
shorten direction if the first fold needs to
be nearer the leading edge. Turn it in the
lengthen direction to move the fold further
down from the leading edge. Make corre-
sponding adjustments for the second fold
if needed.
Latch Down–Adjustment Locked
14
15
16
14. Fold Stop Lever
15. Fold Stop Latch
16. Fold Length Fine
Adjustment Knob
Fold Settings