Maytag MMV5100AAB Installation - Manual (Page 5)

5
VENTING SYSTEM
This microwave oven is set for room venting installation. For roof or wall
venting, changes to the venting system must be made. If wall venting is chosen,
make sure there is proper clearance within the wall for the exhaust vent.
This oven is designed for adaptation to the following three types of
ventilation. Select the type of ventilation required for your installation.
A. Room venting
The charcoal filters are required for room venting installation.
This venting system is normally used for condominiums or apartments.
B. Roof venting
C. Wall venting
NOTE:
• The duct work and cap you need for wall or roof venting are not included.
All wall and roof caps must have a back-draft damper.
• Check the exhaust duct and change it if required. (See pages 8 - 9 for more
information.)
• We recommend that a qualified electrician install the venting system.
CAUTION: To reduce risk of fire and to properly exhaust air, be sure to vent
air correctly. Do not vent exhaust air into spaces within walls or ceilings or
into attics, crawl spaces or garages.
Roof cap
3 - 1 /
4
” x10”
through-the-
roof ducting
3 - 1 /
4
” x10” through-
the-wall ducting
Wall cap
OTR-Installation-M1.fm Page 5 Wednesday, September 27, 2000 4:03 PM