Denon AVR-2310CI - Manual (Page 60)

ENGLISH
Get
ting Star
ted
Connections
Pla
ybac
k
Inf
or
mation
Tr
oubleshooting
Specifications
Multi-Zone
Set
tings
1
Switch .
MAIN/TV
: To operate the TV or iPod
DEVICE
: To operate a Blu-ray disc player, DVD player,
Digital video recorder, video deck, satellite
receiver, cable TV or CD player
2
Set to the component you want to operate.
MAIN : iPod
TV : TV
DVD/HDP : DVD player or Blu-ray disc player
DVR/VCR : DVD recorder or video deck
SAT/CBL : Satellite receiver or cable TV
CD : CD player
3
Operate the component.
b For details, refer to the component’s operating instructions.
Operating the Connected Devices by Remote Control Unit
• Some manufacturers use more than one type of remote control code.
Refer to the included list of preset codes to change the number and
verify correct operation.
• VDP (Video Disc Player) can be preset when is set to “DVD/
HDP”.
• The preset memory can be set for one component only among the
following: DVD/HDP, DVR/VCR and SAT/CABLE.
1
Switch .
MAIN/TV
: To register a TV
DEVICE
: To operate a Blu-ray disc player, DVD player,
Digital video recorder, video deck, satellite
receiver, cable TV or CD player
2
Set to the component to be registered.
TV
: TV
DVD/HDP
: DVD player or Blu-ray disc player
DVR/VCR
: Digital video recorder or video deck
SAT/CBL
: Satellite receiver or cable TV
CD
: CD player
3
Press and at the same
time.
The indicator starts flashing.
4
Press ~ and input the 3-
digit number of the brand of the
component to be preset. The numbers
are shown in the Preset Code Table
(vEnd of this manual).
5
To store the codes of another component in the
memory, repeat steps 1 to 4.
DENON and other makes of components can be operated by setting
the preset memory.
NOTE
Depending on the model and year of manufacture, this function cannot
be used for some models, even if they are of makes listed in the list
of preset codes.
Front
DEVICE SELECT
1 Play / Pause
2 Stop
MEMORY MEMORYz1
TU/PAGE Page up/down z1
8 9
Auto search
(cue)
uio p Cursor
ENTER Enter
3 Pause
SEARCH
Press and
hold
Once
Browse/Remote
mode switching
Page search
mode switching
z2
RETURN Return
z1 : This operation is possible when using a
DENON ASD-3N or ASD-3W Control Dock
for iPod.
z2 : This operation is possible when using a
DENON ASD-1R or ASD-11R Control Dock
for iPod.
iPod
Rear
Front
Main Remote Control Unit
(RC-1117)
Registering Preset Codes
Operating Registered Devices
Remot
e Contr
ol