Denon AVR-2310CI - Manual (Page 36)

33
Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifi
cations
ENGLISH
Multi-Zone
Making detailed settings (Manual Setup)
Setting items Setting contents
Volume Control
Set the MAIN ZONE volume
setting. Volume Display : Set the volume display method.
Relative : The volume is displayed within the range of – – –dB (Minimum),
–80.5 dB ~ +18 dB.
Absolute : The volume is displayed within the range of 0, 1 ~ 99. •
•
Vol.Limit : Make a setting for maximum volume.
OFF : Do not set a maximum volume.
–20dB(61) / –10dB(71) / 0dB(81) •
•
Power On Level : This sets the volume set when the MAIN ZONE’s power
is turned on.
Last : Use the memorized setting from the last session.
– – – : Always use the muting on condition when power is turned on.
–80dB(1) ~ +18dB(99) : The volume is adjusted to the set level. •
•
•
Mute Level : This sets the amount of attenuation of the volume when the
mute mode is set in the MAIN ZONE.
Full : The sound is cut off entirely.
–40dB : The sound is attenuated by 40 dB.
–20dB : The sound is attenuated by 20 dB. •
•
•
Source Delete
Remove
input sources
that are not used from the
display.
TUNER / PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR /
V.AUX / SIRIUS: Select the sources you do not want to use.
ON : Use this source.
Delete : Do not use this source.
NOTE
• The currently selected input source cannot be set.
• Input sources set to “Delete” cannot be selected using
.
•
•
GUI
Make the settings related to
displays on the TV screen. Screensaver : Make screensaver settings.
ON : The screen switches to the screensaver if no operation is performed
for approximately 3 minutes while a menu is displayed or while an iPod
screen is displayed. When you press
uio p , the screen saver is
cancelled and the screen before that screen saver started is displayed.
OFF : Turn the screensaver function off.
•
•
Wall Paper : Set wallpaper to display the background when playback is
stopped, etc.
Picture : Set the background to a picture (DENON logo).
Black : Set the background to black. •
•
Making other settings (Option Setup)
Default settings are underlined.
Setting items Setting contents
Level Lch
Adjust the left channel output
level. –12dB ~ +12dB (0dB)
Level Rch
Adjust the right channel
output level. –12dB ~ +12dB (0dB)
Volume Display
Set the ZONE2 volume
display method. Relative : The volume is displayed within the range of – – –dB (Minimum),
–80 dB ~ +18 dB.
Absolute : The volume is displayed within the range of 0, 1 ~ 99.
Vol.Limit
Make a setting for maximum
volume. OFF : Do not set a maximum volume.
–20dB(61) / –10dB(71) / 0dB(81)
Power On Level
Defi ne the volume setting
that is active when the power
is turned on. Last : Use the memorized setting from the last session.
– – – : Always use the muting on condition when power is turned on.
–80dB(1) ~ +18dB(99) : The volume is adjusted to the set level.
Mute Level
Set the amount of attenuation
when muting is on. Full : The sound is cut off entirely.
–40dB : The sound is attenuated by 40 dB.
–20dB : The sound is attenuated by 20 dB.
• The volume is displayed using the display method set at “Volume Display” (vpage 33).
• Set the main volume at “Volume Control” (vpage 33).
Make settings for audio playback in a ZONE2 system.
“ZONE2 Setup” is displayed when ZONE2 is selected with “Amp Assign” (vpage 28).
Making the ZONE2 settings (ZONE2 Setup)
Default settings are underlined.
See overleaf
: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu
Remote control
operation buttons
:
Displaying the menu
Cancel the menu
Set
tings