Denon AVR-2310CI - Manual (Page 19)

ENGLISH
Get
ting Star
ted
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
Multi-Zone
Set
tings
(/% "6%*0
065
R L
Turntable
(MM cartridge)
Record Player
The AVR-2310CI is compatible with record players with an MM
cartridge. When you connect to a record player with an MC
cartridge, use a commercially available MC head amp or a step-up
transformer.
When you increase the volume without connecting the record player,
there may be “booming” noise from the speakers. •
•
NOTE
The SIGNAL GND terminal of the AVR-2310CI is not a safety ground
connection. Connect it to reduce noise when noise is excessive.
Note that depending on the record player, connecting the ground line
may have the reverse effect of increasing noise. In this case, it is not
necessary to connect the ground line.
Recording Components
R L
R L
R L
R L
3 - 3 -
065 */
"6%*0 "6%*0 7*%&0 7*%&0
065 */
015*$"- 015*$"-
*/
"6%*0 "6%*0
065
7*%&0 7*%&0 $0.10/&/57*%&0
: 1 # 1 3
065
DVD Recorder
NOTE
• To record video signals through the AVR-2310CI, use the same type of video
cable for connection between the AVR-2310CI and the player as the cable
used for connection between the AVR-2310CI and the recorder.
• Do not connect the output of the component connected to the AVR-2310CI’s
OPTICAL2 output connector to any input connector other than OPTICAL2.
• Digital signals are not output from the analog REC OUT connector.
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 37)
Set as necessary
Digital Video Recorder
Select the terminal to use and connect the device.
3 -
065 065
"6%*0 7*%&0 "6%*0 7*%&0
"6%*0
3 -
*/
"6%*0 7*%&0 47*%&0
065
47*%&0
*/
R L
R L
R L
R L
Video cassette recorder
NOTE
• To record video signals through the AVR-2310CI, use the same
type of video cable for connection between the AVR-2310CI
and the player as the cable used for connection between the
AVR-2310CI and the recorder.
• Digital signals are not output from the analog REC OUT
connector.
Set this to change the input signal to which the input
source is assigned.
“Input Assign” (vpage 37)
Set as necessary
Video Cassette Recorder
Select the terminal to use and connect the device.
For instructions on HDMI connections, see “Connecting Devices
Equipped with HDMI terminals” on page 13.
For instructions on HDMI connections, see “Connecting
Devices Equipped with HDMI terminals” on page 13.
Connecting Devices not Equipped with HDMI terminals
Connections