Directed Electronics 2.2 - Manual (Page 30)

30 © 2008 Directed Electronics. All rights reserved.
Exit the vehicle and press the 2.
A U X
button on the remote (the vehicle
shuts down when locking).
Press the
3.
AUX
button on the remote 3 times and then press the
AUX
button. The parking lights flash 5 times fast to confirm the remote
is in Smart Start mode.
The vehicle remote starts when the cabin temperature reaches the pro-
grammed threshold, or when the battery reaches the programmed
voltage.
Use one of the below methods to exit Smart Start mode:
Perform the same steps to activate Smart Start mode •
Turn the ignition On to deactivate manually •
Press the brake pedal •
The parking lights flash 5 times slowly to confirm the remote has exited
Smart Start mode.
➤
Turning on the rear defogger
The rear defogger (if connected) is programmed to automatically acti-
vate when remote start is turned on. If the interior cabin temperature is
above 55˚ F the defogger will not activate.
To manually activate the rear defogger after remote start is on:
Press •
AUX
four times, and then press
AUX
. The parking lights flash 4
times to confirm the defogger activation.