Turbo timer mode – Directed Electronics 2.2 User Manual

Page 28

Note:

The Bitwriter can change the amount of times the remote start

activates and, it can change the intervals between activations in timer
mode.

➤

Turbo timer mode

Turbo timer mode keeps the engine running after arriving at your desti-
nation for a programmable period of 1, 3, 5 or 10 minutes. This allows
the system’s timer to conveniently cool down the turbo after you have
left the vehicle.

To activate Turbo Timer Mode with an automatic transmission:

Make sure the Turbo timer feature is turned on in the features

grid.
Open the vehicle door.

While the vehicle is running; press the

AUX

button twice followed

by the

AUX

button.

The parking lights flash once.

Turn off the ignition (car stays running).

Exit the vehicle and arm the system.

6.
At this point the vehicle stays running for the programmed runtime.

To activate turbo timer mode with a manual transmission:
Perform the procedure for manual transmission vehicles (page 26), with
the door open. Transmit the timer mode feature with the remote by
pressing

AUX

two-times, and then

AUX

. After exiting the vehicle, lock the

system and the vehicle remains running for the programmed runtime.
(The remote start feature is still enabled).
You can still remote start the vehicle after the turbo timer has timed out
and shut off the vehicle. For safety reasons, if a door is opened (while
the alarm is armed or disarmed) or if the alarm is triggered while you
are away, the remote start exits the manual transmission mode and