Mathey Dearman Maxi Jolli Chain Machine - Manual (Page 17)

16
9.0- NOT RECOMMENDED FOR USES
 Maxi Jolli Chain Machine is specially designed to cut and bevel pipes.
 Never to be used in presence of gas or inflammable liquid or solid.
 All obstacles must be removed before operation to insure proper clearance around the pipe.
 Flame torch must not be positioned in direction to the operator or other people.
 Never use torch with inappropriate gas.
 For proper use of Torch and Tip refer to the specific Manual for proper use.
 Switch off the cutting machine and torch prior to machine maintenance.
10 – STORAGE
10.1 - General information
 Lubricate all moving parts of the Maxi Jolli Chain Machine with a light coat of oil.
 Store the machine in a clean, dry, and safe environment.
 Store the machine in the Maxi Jolli Chain Machine storage box if the machine will not be used for an extended
period
of time.
11.0 – RECYCLING OF COMPONENTS
11.1 - Separation of the components
 Separate the components by category for a possible re-use or separate waste.
 Reference local regulations concerning disposal of components.
 The components of MAXI JOLLI CHAIN MACHINE are:
Stainless steel Columns, wheels, floating device, worm-crew bolts, toothed rim, shaft, spring.
Aluminium Main body unit, “U” body unit, torch holder.
Brass Sprocket, torch holder support, slide.
Plastic Crank, knob, handle.