Marantz VP-10S1 - Manual (Page 33)

You can make the following settings.
Lamp Mode High / Low
High Bright On, Off
High Bright On : Display brightest image.
Aspect Full, Normal, Zoom, Through
OSD Position 16:9, 4:3, Through
VCR Mode
On, Off
Cinema Auto, Off
Cinema mode: 2-3 pulldown for NTSC, 2-2
for PAL
Black Setup 0IRE, 7.5IRE
/NORMAL, EXPAND (For DVI input)
Adjusts black level to the source.
– OSD Position
You can select from three positions: 16:9, 4:3 and Through.
– VCR Mode
On : Stabilizes the picture. Use to play back video or input TV signals of weak electromagnetic waves if the image
is unstable when the mode is off.
Off : Normally use this mode.
❖
How to Operate the Setting Menu
1. Select the desired menu item and press the
2
button.
The setting item will appear on the screen.
2. Use the
3
and
4
buttons to set the item.
3. Press the
1
button to enter the setting and return to menu item selection.
INPUT ASPECT
MENU V-MUTE
ENTER
2.
1, 3
INPUT PATTERN
ENTER
2
1,3
OSD position for Through OSD position for 4:3 OSD position for 16:9
Picture Adjust
Menu Standard 1
Setting
Display
System
Config
Trigger 2
Preset
Contrast
Brightness
Coior
Sharpness
Tint
Noise Reduction
Color Temp.
Fine Menu
50
44
58
7
0
0
3
Picture Adjust
Menu Standard 1
Setting
Display
System
Config
Trigger 2
Preset
Contrast
Brightness
Coior
Sharpness
Tint
Noise Reduction
Color Temp.
Fine Menu
50
44
58
7
0
0
3
Picture Adjust
Menu Standard 1
Setting
Display
System
Config
Trigger 2
Preset
Contrast
Brightness
Coior
Sharpness
Tint
Noise Reduction
Color Temp.
Fine Menu
50
44
58
7
0
0
3
Picture Adjust
Setting
System
Display
Config
Trigger 2
Preset
Lamp Mode
Aspect
OSD Position
VCR Mode
Cinema
Black Setup
High
Full
High Bright Off
16:9
Off
Auto
0 IRE
Menu Standard 1
Setting
29
ENGLISH