Marantz VP-10S1 - Manual (Page 10)

6
ENGLISH
Front and Top
MENU INPUT P ATTERN
ENTER
POWER
ST ANDBY ON
W AR NIN G W AR NIN G W AR NIN G
W ARNING W ARNING W ARNING
7
8
1 2
3
9 4
10
6
5
q
POWER button (
☞
pg. 20)
Switches power ON/OFF (standby).
w
MENU button (
☞
pg. 25)
Displays the on-screen menu (*OSD).
* OSD: Acronym for On Screen Display. With this projector,
OSD entails menus for making adjustments and
settings.
e
INPUT button (
☞
pg. 21)
Selects the Input signal.
Pressing the button one time displays the currently selected
Input signal. Every time the button is pressed after that, the
Input signal rotates in the order of COMPONENT 1
➔
COMPONENT 2 ➔ S-VIDEO ➔ VIDEO ➔ RGB ➔ AUX.
r
PATTERN button (
☞
pg. 17)
Projects a focus pattern on the screen. The focus and zoom
can then be set using the cursor buttons.
t
ENTER button
Enters items selected on menus and settings.
y
Cursor buttons
Press the cursor buttons (
3
[UP],
4
[DOWN],
1
[LEFT],
2
[RIGHT]) to select menu items.
u
POWER ON indicator
Lights up blue when power is on. When power is shut off, the
lamp flashes for about 1 min before going out.
i
STANDBY indicator
Lights up red when the projector is on standby.
o
WARNING indicator
Lights up or flashes if trouble occurs with the projector.
For error mode, see the list in “Error Mode List” (
☞
pg. 43).
!0
Vents (Exhaust / Intake)
Notes:
• Keep hands away from the exhaust vent as hot air is blown
from inside the projector.
• Do not block the intake vent. This prevents cooling and
causes the protective circuit to trip. (
☞
pg. 2)
!1
ON/OFF switch
This is the main power switch.
!2
AC IN socket (
☞
pg. 15)
Connect the included AC power cable here to supply power to
the projector.
NAMES AND FUNCTIONS OF PARTS
Projection
Lens
IR sensor
IR sensor