Marantz AV8801 - Manual (Page 136)

133
Setting items Setting details
HDMI
Set this to change the HDMI
input connectors assigned
to the input sources.
CBL/SAT DVD
Blu-ray GAME
AUX1 AUX2
MEDIA PLAYER CD
TV AUDIO
1 / 2 / 3 / 4 / 5 / 6 / Front : Assign an HDMI input connector to the selected
input source.
– : Do not assign an HDMI input connector to the selected input source.
• At time of purchase, the settings of the different input sources are as
shown below.
Input
source
CBL/SAT DVD Blu-ray GAME AUX1
Default
setting
1 2 3 4 Front
Input
source
AUX2
MEDIA
PLAYER
CD TV AUDIO
Default
setting
6 5 – –
• To play the video signal assigned at “HDMI” combined with the audio
signal assigned at “Input Assign” – “DIGITAL”, select “Digital” at “Input
Mode” (
vpage 136 ).
• Audio signals input from analog and digital connectors cannot be output
to a TV that is connected via HDMI.
• When “HDMI Control” ( vpage 128 ) is set to “On”, HDMI input
connector cannot be assigned to “TV AUDIO”.
Inputs
Input Assign
This unit has certain input sources such as “CBL/SAT” assigned to audio and video connectors by default.
By making the default connections, you can simply press an input source select button to play back audio
or video from the connected device with ease.
When making connections other than the default settings, you must change settings in this section.
Examples of “Input Assign” menu screen displays
This screen appears when the “Inputs” – “each input source” – “Input Assign” menu is selected. Use the
“Input Assign” menu to change the w HDMI input connectors, e Digital input connectors, r Analog
input connectors, t Component input connectors, and y Video input connectors that are assigned to the
q
input sources in default settings.
DIGITAL ANALOG HDMI COMP VIDEO
Inputs/Input Assign
Set Defaults
CBL/SAT
DVD
Blu-ray
GAME
MEDIA PLAYER
TV AUDIO
AUX1
AUX2
CD
1
2
3
4
5
-
Front
6
-
1
2
3
4
6
-
Front
-
5
1
2
3
-
-
-
-
-
-
1
2
-
-
3
-
Front
-
-
COAX1
COAX2
-
-
-
OPT1
-
-
OPT2
Changes HDMI input assignments
y t r e w
q
Input assignments menu operations
1
Use uio p to move the cursor to the item you want to set, and
then press ENTER .
2
Use o p to select the input connector to be assigned.
3
Press ENTER to register the setting.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
v See overleaf
DVD