Playback, Sleep timer function, Sleep timer function”) – Marantz AV8801 User Manual
Page 116
113
Playback
1
Press
ZONE SELECT
to switch
“ZONE2”, “ZONE3” or
“ZONE4”.
Input source
select buttons
2
Press
ON/STANDBY
X
to turn on
the ZONE2, ZONE3 or ZONE4
power.
• Also press input source select button when
in standby mode, the power turns on.
• When
ON/STANDBY
X
is pressed, ZONE2,
ZONE3 or ZONE4 turns off.
• Power in ZONE2, ZONE3 or ZONE4 can
be turned on or off by pressing
ZONE2 ON/
OFF
,
ZONE3 ON/OFF
or
ZONE4 ON/OFF
on
the main unit.
3
Press the input source select button to select the input
source to be played.
The audio and video signal of the selected source is output to
ZONE2, ZONE3 or ZONE4.
• Turn
INPUT SELECTOR
after pressing
ZONE SELECT
on the main
unit to select an input source.
When power for both MAIN ZONE and ZONE2 (ZONE3 or ZONE4) is
set to ON, power of the MAIN ZONE only can be turned off. Select
MAIN ZONE in step 1 then press
ON/STANDBY
X
.
Adjusting the volume
Use
VOLUME
df
to adjust the volume.
GAdjustable rangeH 0 – 40 – 98
(When the “Scale” (
) setting is “0 – 98”)
GAdjustable rangeH – – – –79dB – –40dB – 18dB
(When the “Scale” (
) setting is “–79.5dB – 18.0dB”)
• At time of purchase, “Volume Limit” (
) is set to “70
(–10dB)”.
Turn
VOLUME
after pressing
ZONE SELECT
on the main unit to adjust
the sound volume.
NOTE
For ZONE4, you cannot use
VOLUME
df
to adjust the volume level.
Turning off the sound temporarily
Press
MUTE
:
.
The sound is reduced to the level set at “Mute Level” (
)
in the menu.
• To cancel, either adjust the volume or press
MUTE
:
again.
• The setting can also be cancelled by adjusting the volume or turning
off the ZONE2 or ZONE3 power.
• You can adjust the tone and volume for ZONE2 or ZONE3 in “ZONE2
Setup” or “ZONE3 Setup” (
) in the menu.
• The All Zone Stereo function allows you to simultaneously enjoy in
multi-zones (ZONE2/ZONE3) the music that is played back in MAIN
ZONE during home party, etc. (
Sleep timer function
• This is convenient for viewing and listening while going to sleep in
ZONE2, ZONE3 or ZONE4.
• The sleep timer function can be set by zone.
1
Press
ZONE SELECT
to switch
“ZONE2”, “ZONE3” or
“ZONE4”.
2
Press
SLEEP
and display the time
you want to set.
• The time switches as shown below each time
SLEEP
is pressed.
Off
10 min
20
30
40
50
60
80
70
90
100
110
120
• If
SLLEP
on the main unit is pressed, the same function as with the
remote control unit can be obtained.
To confirm the countdown time before putting the
unit to sleep
Press
SLEEP
.
“Z2 Sleep :
zmin”, “Z3 Sleep : zmin” or “Z4 Sleep : zmin” appears
on the display.
z Countdown time
To cancel the sleep timer
Press
SLEEP
to set “Off”.
The sleep timer is also cancelled when this unit is set to the standby
mode or the ZONE2, ZONE3 or ZONE4 power is turned off.
NOTE
The sleep timer function cannot turn off the power of devices
connected to this unit. To turn off the power of those connected
devices, set up sleep timers on the connected devices themselves.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mations
A
dv
anced v
ersion
DVD