Datalogic Scanning Industrial PDA - Manual (Page 27)

Resetting the Pegaso
Quick Reference Guide 25
Figure 14. Warm Reset
After Warm Reset
• The splash screen will appear briefly.
• The desktop appears with the application shortcuts on the screen.
• The RF Network PC Card (if present) connects to the network system.
.
Cold Reset
A cold reset is a complete reset of the Pegaso in which all applications are forc-
ibly closed and working RAM is cleared.
Reason to Cold Reset —
Use a cold reset when the Windows CE operating
system locks up and the warm reset command does not work.
Procedure to Cold Reset —
To perform a cold reset, remove the Battery
Pack and use the Stylus to press the button inside the Battery Compart-
ment, shown in Figure 15 . Reinstall the Battery Pack, and press the
button.
The custom settings in the registry are persistent.
CAUTION
Datalogic recommends that you always attempt a warm reset before
initiating a cold reset. Once you initiate a cold reset, all applications
are forcibly closed and working RAM and files are cleared.
Any applications, files, or data in RAM will be lost on cold reset. Only
applications and files in persistent memory are preserved. Refer to
Persistent Memory on page 23 for information on preserving appli-
cations and files with persistent flash storage memory.
AZ
1
2
3
ESC
GHI
WXYZ
JKL MNO
ABC DEF
AZ
TAB
1 2 3
4 5 6
7
0
9 8 FN PQRS TUV