Datalogic Scanning Industrial PDA - Manual (Page 15)

Setting Up the Mobile Computer
Quick Reference Guide 13
Touchscreen Calibration
Figure 5. Touchscreen Calibration
Getting Connected
Bluetooth Setup
1. Open the Bluetooth control panel at Start > Settings > Control Panel >
Bluetooth Manager .
2. Search for available Bluetooth Devices by tapping the button for the type
of device you want
(Printer, Serial or All) .
3. Create a pairing by double tapping the listing for the device you want and
selecting the service. If you want to specify encryption or require authen-
tication, enable the appropriate checkbox.
4. Tap OK to complete.
For detailed instructions, reference the PRG.
Connecting to a PC
In order for the Pegaso to communicate with a host PC, Microsoft® ActiveSync
must be installed on the computer. Go to www.microsoft.com/downloads/ for
information. Reference the Pegaso PRG for detailed instructions.
IP Network Setup
1. Select Start > Settings > Network and Dialup Connections .
2. Double-tap on the item (varies based on the radio installed and the num-
ber of connections).
Follow the on-screen directions to calibrate
the touchscreen.
For more information on touchscreen cali-
bration, refer to the PRG.