Marantz SR5010 - Manual (Page 166)

o Mute Level
Set the amount of attenuation when muting is on.
Full
(Default):
The sound is muted entirely.
–40 dB : The sound is attenuated by 40 dB down.
–20 dB : The sound is attenuated by 20 dB down.
Audyssey ®
Set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey
Dynamic Volume ® . These can be selected after Audyssey ® Setup has
been performed.
For additional information on Audyssey technology, please see
“Explanation of terms” (v p. 268).
0 “MultEQ ® XT”, “Dynamic EQ”, “Reference Level Offset” and “Dynamic Volume”
settings are stored for each input source.
0 When the sound mode is in the “Direct” or “Pure Direct” mode, “MultEQ ® XT”,
“Dynamic EQ” and “Dynamic Volume” settings cannot be configured.
0 This cannot be set when the input mode is set to “7.1CH IN”.
Contents Connections Playback Settings Tips Appendix
166
Front panel Display Rear panel Remote Index