Marantz SR5010 - Manual (Page 162)

o Dynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Auto:
Automatic dynamic range compression
on/off control according to source.
Low / Medium / High: These set the compression level.
Off:
Dynamic range compression is always
off.
0 “Dynamic Compression” can be set when Dolby Digital, Dolby Digital Plus,
Dolby TrueHD or Dolby Atmos signal is input.
0 The default setting is “Off”. When the input signal is the Dolby TrueHD or
Dolby Atmos source, the default setting is “Auto”.
o Dialog Control
Adjust the volume of dialog in movies, vocals in music, etc. so these
can be heard more easily.
0 – 6 (Default : 0)
0 This can be set when a DTS:X signal that is compatible with the Dialog
Controll function is input.
o Low Frequency Effects
Adjust the low frequency effects level (LFE).
n When “Input Mode” is set other than to “7.1CH IN”
-10 dB – 0 dB (Default : 0 dB)
n When “Input Mode” is set to “7.1CH IN”
0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB)
0 For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources : 0 dB
0 DTS movie sources : 0 dB
0 DTS music sources: -10 dB
Contents Connections Playback Settings Tips Appendix
162
Front panel Display Rear panel Remote Index