When “hdmi pass through” is set to “on” (v p. 172), Oarc, Ohdmi pass through – Marantz NR1606 User Manual
Page 172
o
ARC
On the TV connected to the HDMI MONITOR connector, set whether
to receive sound from the TV via HDMI.
On:
Use ARC function.
Off
(Default):
Do not use ARC function.
0 You can adjust the volume of this unit using the TV remote control.
0 If using this function, use a TV compatible with ARC (Audio Return Channel)
and enable the HDMI control function of the TV.
0 When “HDMI Control” is set to “On”, the “ARC” settings automatically switch
NOTE
0 If the “ARC” settings have been changed, always reset the power to
connected devices after the change.
o
HDMI Pass Through
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Transmits the selected HDMI input
through the AV receiver’s HDMI output
when this unit is in standby power mode.
Off:
No HDMI signals are transmitted through
this unit’s HDMI output in standby power
mode.
172