When “hdmi control” is set to “on” (v p. 171), Is set to “tv”. (v p. 171), V p. 171) – Marantz NR1606 User Manual
Page 171: Set “hdmi control” to “on”. (v p. 171), Tv. ( v p. 171), Ohdmi audio out, Ohdmi control
o
HDMI Audio Out
Select HDMI audio output device.
AVR
(Default):
Play back through speakers connected to
the unit.
TV:
Play back through TV connected to the
unit.
0 When the HDMI control function is activated, priority is given to the TV audio
0 When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is
output as 2-channel from the HDMI OUT connector.
o
HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On:
Use HDMI control function.
Off
(Default):
Do not use HDMI control function.
0 Please consult the operating instructions for each connected device to check
the settings.
0 Refer to “HDMI control function” for more information about the HDMI control
function. (v p. 134)
NOTE
0 If the “HDMI Control” settings have been changed, always reset the power to
connected devices after the change.
171