Lynx Studio LynxONE - Manual (Page 4)

Page 4
Introduction
Thank you for purchasing the LynxONE™! We are proud to provide you with a reliable,
professional quality product for your digital audio and MIDI needs. This Installation
and Users Guide provides basic information to help you get started.
Before you begin
Before you begin the installation of your LynxONE card, we recommend that you read
through the Installation and Users Guide to acquire an overview of the installation
procedure and use of the LynxONE. You should have a working knowledge of Windows
and general PC concepts. Additionally, refer to your computer’s documentation for
any special instructions regarding the installation of expansion cards and peripheral
equipment.
Contents
Verify that you received the following in the LynxONE shipping carton:
• LynxONE PCI Card in cushioned antistatic bag
• LynxONE Audio Cable (6 foot cable with XLR connectors)
• LynxONE MIDI/Clock Cable (2 foot cable with DIN and BNC connectors)
• LynxONE Installation and Users Guide
• Setup Disk for Windows
• Warranty Registration card
Optional Equipment
The following equipment may be required depending on the configuration of your
system and the type of devices the LynxONE is connected to:
• Lynx Internal Clock Cable (available from Lynx)
• XLR to TRS or XLR to RCA adapter cables
System Requirements
Verify that your computer meets or exceeds either of the following configurations:
Minimum System
•
A 90MHz Pentium-class or Alpha processor.
• VGA display and adapter.
• 16MB of RAM.
• Windows 95/98/98SE, Windows NT 4.0 or Windows 2000
• 1 Empty PCI Slot
Recommended System
•
A 166MHz Pentium-class or Alpha processor.
• S-VGA display and adapter.
• 32MB of RAM.
• Windows 95/98/98SE, Windows NT 4.0 or Windows 2000
• 1 Empty PCI Slot
Introduction