Lynx Studio LynxONE - Manual (Page 26)

Page 26
Appendix
Appendix
Specifications
Analog I/O
Number / Type Two inputs and two outputs / cross-coupled electronically
balanced or unbalanced, XLR connectors on Audio cable
Level +4 dBu nominal /+20dBu max. or –10dBV nominal /
+6dBV max., 600
Ω
load on outputs
Input Impedance Balanced mode: 24 k
Ω
, Unbalanced mode: 12 k
Ω
Output Impedance Balanced mode: 100
Ω
, Unbalanced mode: 50
Ω
Output Drive Capability 600
Ω
impedance, 0.16 µF capacitance
A/D and D/A Type Crystal Semiconductor, 24-bit, 128X oversampling, delta-
sigma
Sample Rates 8 kHz to 50 kHz, including all standard rates with high-
resolution adjustment
Bit Depth 8, 16, 24 or 32 bit file types
On-board Buffer Size 8 Kbytes X 2, for L/R input and output
Analog Performance (measured in 24-bit mode with card installed in computer)
Frequency Response 20 – 20 kHz, +0/-0.35 dB
Dynamic Range >103 dB, A-wtd., analog in to analog out using -60 dBFS
measurement method
Signal-to-Noise >99 dB, A-wtd., analog in to analog out
Channel Crosstalk <-103 dB, analog in to analog out, 1 kHz signal @ -1
dBFS
Input THD+N 0.0022% typ., 1 kHz signal @ -1 dBFS, 22 – 22kHz BW,
analog input to digital output
Output THD+N 0.0015% typ., 1 kHz signal @ -1 dBFS, 22 – 22kHz BW,
digital input to analog output
Digital I/O
Number / Type One input and one output / AES/EBU or S/P DIF format,
transformer coupled, XLR connectors on Audio cable
Sample Rates 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Bit Depth 8, 16, 24 or 32 bit file types
On-board Buffer Size 8 Kbytes X 2, one each for input and output
MIDI I/O
Number / Type Two ports each with input and output / Standard opto-
isolated, 5-pin female DIN connectors on MIDI/Clock
cable
Buffer Size 64 bytes, receive and transmit
Clock I/O
Number External: one BNC input and output on MIDI/Clock cable
Internal: one input and output on board-mounted headers
Level / Impedance TTL / 75 ohm
Input Frequency Range 25 kHz to 27 MHz