Luxi Electronics DIY-30BS10 - Manual (Page 3)

Website:
www.luxielectronics.com
Email: [email protected]
Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
HD DIY user manual ribbon wires Revision: 2.00 Date: 1/26/2015
US patents: 8002572, 8500489, 8507796 issued; others issued or pending in multiple countries
Step 1, wire preparations
1.1 Use a blade to cut around a circle of the
HDMI cable overall jacket about 4 cm (1-1/2”)
from the end
1.2 Use the blade to slice along the cable
overall jacket then peel off the overall jacket
1.3 Fold back the braids
1.4 Remove the overall aluminum foil; now the 2
ribbons inside the HDMI cable are exposed
1.5 Un-twist the two ribbons, cut off the filler in the
middle
1.6 Make a clean angled cut of each ribbon