Luxi Electronics DIY-30BS10 - Manual (Page 2)

Website:
www.luxielectronics.com
Email: [email protected]
Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
HD DIY user manual ribbon wires Revision: 2.00 Date: 1/26/2015
US patents: 8002572, 8500489, 8507796 issued; others issued or pending in multiple countries
Identifying the components
First, make sure you have all the necessary parts for the field termination.
As shown in the picture above, you need the Luxi HDMI DIY connector components (5-piece) for ribbon
cables, Luxi connector clamshell (2-piece), Luxi raw HDMI ribbon cables, a Luxi hand tool and a blade.
Be familiar with the component names as show below. HDMI connector has a wider side with 10 pins
and a narrower side with 9 pins. We call the wider side the top side. For the two wire holders, the top
wire holder is black, bottom on is white; the side with many slots is the inner side; this is the side which
will be pushed onto the sharp pins of the connector core.