Luxi Electronics DIY-28DS10 User Manual
Wire color coding

Website:
www.luxielectronics.com
Email:
Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
HD DIY user manual regular wires
Revision: 2.00
Date: 1/26/2015
US patents: 8002572, 8500489 issued; additional patents issued or pending in multiple countries
For terminating HDMI regular wires
Thank you for purchasing the Luxi Electronics patented HD DIY (Do It Yourself) field termination products.
If you are an experienced installer with the DIY products, you can just print out this first page with wire
color coding picture for your reference. If you are new to the DIY products, please make sure you read
through all the pages before performing the termination.
Wire color coding
Since there’s no industry-wide HDMI color coding standard, please follow the instructions below closely.
Making a new cable:
If you are using Luxi HDMI regular wires (or other branded HDMI regular wires with the same wire colors),
please follow the wire color coding below.
If you are using a HDMI regular wires with different wire colors, please mark the color cross reference on
a piece of paper and make sure the same wire goes to the same pin on both ends.
Repairing one end of an existing cable:
If you are repairing a pre-terminated HDMI cable and only need to re-terminate one end, please write
down the color coding for each pin carefully before cutting off the old plug.