Denon DN-M991R - Manual (Page 27)

27
ENGLISH
5- 1
Inserting a track in the program.
Select the position at which to insert a track.
Turn the select knob.
5- 2
Set the program insert mode.
Press the SEARCH 7 button.
5- 3
Perform the same operations as in steps 4-1 and 4-2 to
select the track to be inserted.
To insert more tracks in the program, repeat steps 5-1,
5-2, and 5-3.
(To exit the program insert mode, press the PROGRAM IN
button.)
6- 1
Deleting tracks from the program
Select the step to be deleted.
Turn the select knob.
Lit
To insert a track at the third step
in the program:
The step number flashes
Lit
To delete the track at the third step:
6- 2
Delete that track from the program.
Press the SEARCH
6 button.
To continue deleting tracks from the program, repeat
steps 6-1 and 6-2.
7
Exit the program editing mode.
Press the PROGRAM IN button.
1
Set the program play mode.
Press PROGRAM ON/OFF button.
2
Start programmed playback.
Press the PLAY/PAUSE button.
The first track in the program is cued and the standby
mode is set.
Programmed playback starts.
PLAY/PAUSE PLAY/PAUSE STANDBY/CUE
Number of track at the next step in the program:
The next step number lights
Lit
(3) Playing Programs
Number of
next step
Lit
Lit Flashing
Off Lit
• When the cartridge is ejected, the set program is cleared.
• If a track that is not in the program is selected with a serial
command during programmed playback, that command is
ignored.
NOTE:
Programs cannot be input when no disc is loaded.
Lit