Denon DN-M991R - Manual (Page 23)

23
ENGLISH
HANDY OPERATIONS
(1) Setting Cue Points
With this function, cue points can be set at any positions in tracks
then searched for during playback. Up to five cue points can be
set per track.
1
In the standby, pause, manual search or play mode:
Set the EDIT mode.
Press the MODE button.
2
Find the position at which you want to set the cue
point.
Use the SEARCH
7 / 6 buttons to find the position at
which you want to set the cue point.
3- 1
Set the cue point.
Press the CUE WRITE button.
EDIT
MODE MODE
3- 2
Press the CUE WRITE button again while Cue Write OK?
is displayed.
4
To continue setting other cue points:
Repeat steps 2, 3-1 and 3-2.
Lit
Lit
Flashing
Off Flashing
5- 1
Write the UTOC. (Cancel the edit mode.)
Press the MODE button.
5- 2
Press the REC button while UTOC Write? is displayed.
6- 1
To set cue points during recording:
Press the CUE WRITE button.
6- 2
Press the CUE WRITE button again while Cue Write OK?
is displayed.
NOTE: The UTOC is written once recording is completed.
Lit
Flashing
Off Off
Lit
Flashing
6
Lit
Off