La Crosse Technology WS-9724 - Manual (Page 39)

To wall mount:
1. Secure the bracket onto a desired wall using the screws and plastic
anchors.
2. Clip the remote thermo-hygro transmitter onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place all units in the desired locations to
check that the outdoor temperature reading is receivable. In event that the signal is not received,
relocate the transmitters or move them slightly as this may help the signal reception.
CARE AND MAINTENANCE:
• Extreme temperatures, vibrations and shocks should be avoided as these may cause
damage to the unit and give inaccurate forecasts and readings.
88