La Crosse Technology WS-9724 - Manual (Page 21)

"Day. Month." (for 24h time display)
"Month. Day." (for 12h time display)
The date default of the Weather station is 1. 1. of the year 2006 after initial set-up. Once the
radio-controlled time signals are received, the date is automatically updated. However, if the
signals are not received, the date can also be set manually. To do this:
1.
Using the + key, set the year required. The range runs from 2003 to 2029 (default is 2006).
2. Press the SET key to enter the month setting mode.
3. The month digit will be flashing. Press the + key to set the month and then press the SET
key to go to the date setting.
4. The date digit will be flashing. Press the + key to set the date.
5. Confirm with the SET key and enter the “°C/°F TEMPERATURE UNIT SETTING” or exit
the setting mode by pressing the CH key.
70