La Crosse Technology WS-9724 - Manual (Page 18)

1. The current time zone value starts flashing.
2. Use the + key to set the time zone. The range runs from 0, -1, -2…-12, 12, 11, 10… 2, 1,
0, in consecutive 1-hour intervals.
3. Confirm with the SET key and enter the Time reception On/ Off setting.
TIME RECEPTION ON/OFF SETTING
Flashing
(time reception icon)
flashing
In area where reception of the radio-controlled time (DCF time) is not possible, the time
reception function can be turned OFF. The clock will then work as a normal Quartz clock.
(Default setting is ON).
1.
The digit “ON” and the time reception icon will start flashing on the LCD.
2. Use the + key to turn OFF the time reception function.
3. Confirm with the SET key and enter the “12/24-Hour Display setting” or exit the setting
mode by pressing the CH key.
67