D-Link DI-713P User Manual

Page 60

Text mode
Original mode

Wireless Troubleshooting

Can’t access the Broadband Router from a wireless network card
Cause:
§ Settings are not the same among each wireless adapter.
§ Out of range.
§ IP Address is not set correctly.
Resolution:
§ Make sure that the Mode, SSID, Channel and encryption settings are

set the same on each wireless adapter. The default SSID and Channel
that the Wireless Broadband Router uses is “default” and “6”
respectively.

§ Make sure that your computer is within range and free from any strong

electrical devices that may cause interference. Refer to the section
“Introduction to Wireless Networking” for tips to help make a good
connection.

§ Check your IP Address to make sure that it is compatible with the

Wireless Broadband Router. The default IP Address of the Wireless
Broadband Router is “192.168.0.1”. A compatible IP Address would be
“192.168.0.50”.