Kreg Jig K4 - Manual (Page 9)

800-447-8638 www.kregtool.com
Additional Components Additional Components
Material Support Stop
Repeatable Pocket-Holes.
The Material Support Stop serves two great
purposes. Supporting long stock on either
side of the jig, and providing the ability to
drill consistent repeatable Pocket-Holes, at
equal distances.
To use the Material Support Stop as a
repeatable stop, simply screw the stop to the
work surface at your chosen distance from
the jig and fi ne-tune the arm to the exact
distance desired.
To use the Material Support Stop to support
your workpiece, simply swing the stop arm
out of the way and slide the workpiece into
position.
For more detailed instructions, please
visit us online at www.kregtool.com.
Portable Base
Work from anywhere. Connect the brass pin to
the Portable Base.
Prepare the Portable Base for use by either
screwing it to your work surface, or securing it to
a Kreg Face Clamp™.
Match the markings on the side of the Drill Guide
to the thickness of your workpiece.
Clamp each workpiece securely to your jig and
your workspace before drilling.
* This kit includes one Material Support Step