Kreg KKS1020 Klamp Trak - Manual

Logo on white, gray
or any lighter shade
when printing color
Logo on Pantone
2945 or any darker
shade when printing
color
Logo on white
or light shade when
printing grayscale
Logo on black or
dark shade when
printing grayscale
Klamp Trak
Instructions
TM
ITEM# KKS1020 - Klamp Trak TM
1. Rout into edge of workbench (page 1)
2. Add a 3/4” surface to the top of your workbench (page 2)
3. Place between two staggered pieces of 3/4” plywood (page 3)
Getting Started
There are three main methods for installing Klamp Trak™ in your workshop. In all three methods, your goal will be to construct an opening
with the same (or slightly larger) dimensions as the Klamp Trak™, directly below your intended work surface. This will allow the trak to sit
flush-with or slightly below the main surface, keeping your work surface clear of obstacles. Klamp Trak™ dimensions can be found in the
diagram on page 5 of this instruction manual..
Below are the three methods to choose from. Depending on how you intend to use your Klamp Trak™,
determine the best choice for your specific situation.