K-Patents PR-33-S - Manual (Page 22)

18 PR-33-S instruction manual
Document/Revision No. Rev. 1.4 Effective: May 15, 2015
3.1.4 Mounting cover
Mounting covers come in two sizes: small mounting cover for 1/4” and 1/2” flowcells
and large mounting cover for 3/4” and 1” lines.
Fit the two halves of the mounting cover over the flowcell and secure with the screws
provided.
Figure 3.1 Mounting cover assembly
3.2 Connecting the sensor
Connect the sensor to a PoE switch. Make sure you connect the sensor to a powered
port, some switches have both PoE ports and normal ethernet ports.
Then connect your laptop or control system to the switch. You can also use a K-Patents
FC-11 Field Communicator.