Push stick – Delta 36-600 User Manual
Page 24
24
CONSTRUCTING A PUSH STICK
When ripping work less than 4 inches wide, a push stick should be used to complete the feed and could easily be made
from scrap material by following the pattern shown in Fig. 61.
CUT OFF HERE TO
PUSH 1/4
″
WOOD
CUT OFF HERE TO
PUSH 1/2
″
WOOD
1/2
″
SQUARES
NOTCH TO HELP
PREVENT HAND
FROM SLIPPING
Fig. 61
PUSH STICK
MAKE FROM 1/2
″
OR 3/4
″
WOOD OR THICKNESS
LESS THAN WIDTH OF
MA
T’L. TO BE CUT