Dynacord H 2500 - Manual (Page 37)

PowerH SERIES
Owner’s Manual 37
IRIS-Net
™
Configuring and controlling a remote amplifier
with a RCM-26 module installed is possible
through the use of IRIS-Net™ (Intelligent
Remote & Integrated Supervision) PC-software.
IRIS-Net™ allows programming the RCM-26
module’s complete configuration while the
computer is off-line. All instructions on how to
configure, operate and monitor all RCM-26
functions are included in the IRIS-Net™ help
files.
Illustration 4.2: Pre Fader mode (left) and Post Fader mode (right)
Illustration 4.3: DSP flow diagram of the RCM-26