Kleenmaid V Series - Manual (Page 6)

6
Touchmatic™ Electronic Controls
(some models)
Locate power switch on right side of black box in center of
cabinet behind toe grille. Turn power switch
on before
programming.
Touchmatic ™ electronic control is located on refrigerator
door adjacent to handles. Press * pad to activate control
panel. All other pads, except for alarm off
pad, remain
inactive until * pad is pressed. Once activated, pads
remain programmable for at least 10 minutes.
Refrigerator and freezer controls are preset at 5. Wait 24
hours after connecting power for refrigerator and freezer
sections to reach desired temperatures. After 24 hours,
adjust controls as desired. 1 is warmest setting and 9 is
coldest. Refer to “Setting Controls” section to set controls
precisely.
• Adjust refrigerator or freezer temperatures by pressing
* pad then refrigerator temperature pad or freezer
temperature pad. Press warmer pad or colder pad to
adjust temperature setting 1 level at a time. Holding
down warmer pad or colder pad adjusts temperature
more than 1 level at a time.
• See the illustration on following page for electronic
controls pad descriptions.
Controls
This refrigerator is designed to operate at normal
household temperatures of 13° to 43°C.
Refrigerator and Freezer Controls (non
electronic models)
Refrigerator and freezer controls are located on upper rear
wall of refrigerator section.
A
B
A. Freezer control
B. Refrigerator control
Controls
When freezer control is turned off, neither refrigerator nor
freezer sections will cool. Initially, set both controls to 4.
Wait 24 hours for refrigerator and freezer sections to
reach desired temperatures. 1 is warmest setting and 7 is
coldest.
Setting Controls
Set controls with a household thermometer that includes
temperatures between -21° and 10°C.
Put thermometer snugly between frozen packages in
freezer section. Wait 5–8 hours. If freezer temperature is
not -18C, adjust control, 1 number at a time. Check again
after 5–8 hours.
Put thermometer in a glass of water in middle of
refrigerator section. Wait 5–8 hours. If refrigerator
temperature is not 3° to 4°C, adjust control, 1 number at a
time. Check again after 5-8 hours.
Use and Care Section