Kleenmaid V Series - Manual (Page 15)

15
Lower refrigerator section (Some models)
• Disconnect refrigerator from current before replacing
light bulb either by unplugging the refrigerator or
switching of the installation fuse.
• Remove light bulb cover by removing screw. See light
housing for replacement bulb wattage.
• Replace light bulb cover by placing cover over light
bulb. Insert and tighten screw.
A
B
C
A. Light bulb B. Light bulb cover
C. Screw
Lower refrigerator light bulb removal
Freezer section
• Disconnect refrigerator from current before replacing
light bulb either by unplugging the refrigerator or
switching of the installation fuse.
• Remove ice bucket by lifting bucket and pulling out.
• Remove light bulb cover by removing screw. See light
housing for replacement bulb wattage.
• Replace light bulb cover by holding cover in place over
light bulb. Insert and tighten screw.
• Replace ice bucket by sliding in until bucket locks in
place.
A
B
C
A. Light bulb cover B. Light bulb
C. Screw
Freezer section light bulb removal
Ice ‘N’ Water ™ dispenser (Some models)
Light bulb is located between dispenser arms.
• Disconnect refrigerator from current before replacing
light bulb either by unplugging the refrigerator or
switching of the installation fuse.
• Remove light bulb by unscrewing light bulb. Replace
light bulb with a 6-watt, 250-volt bulb.
• Replace light bulb by inserting and tightening bulb.
Dispenser light bulb replacement