Kleenmaid TO900X - Manual (Page 25)

24
WALL INSTALLATION, DOUBLE OVEN
Figure 12
Note:
1. Do not slide oven across floor. Damage to
floor covering or floor could result.
2. The oven support surface must be a
minimum 19mm thick plywood platform,
solid, level and flush with the bottom of the
cabinet cutout.
3. Use extreme caution when moving or
installing the oven. It is very heavy.
4. Be very careful when moving or installing
the oven to avoid damage to the oven
frame or damage to the cabinets.
5. Be sure to level oven. An oven that is not
level may provide poor or inconsistent
baking results.
6. Be careful when placing oven. DO NOT
pinch the wiring between the oven back or
wall and the inner cabinet wall or floor.
WARNIN
WARNING!
Securely fasten oven to cabinet using the screws
provided. Failure to do so could result in oven
moving or tipping during use and causing damage
to the oven or cabinets or personal injury. Screws
should be inserted through the mounting holes in
positions indicated in frame (open door to see frame
and mounting holes). Do not overtighten screws.