beautypg.com

Wall installation, single oven – Kleenmaid TO900X User Manual

Page 24

background image

23

WALL INSTALLATION, SINGLE OVEN

Figure 11

Note:
1. Do not slide oven across floor. Damage to

floor covering or floor could result.

2. The oven support surface must be a

minimum 19mm thick plywood platform,
solid, level and flush with the bottom of the
cabinet cutout.

3. Use extreme caution when moving or

installing the oven. It is very heavy.

4. Be very careful when moving or installing

the oven to avoid damage to the oven
frame or damage to the cabinets.

5. Be sure to level oven. An oven that is not

level may provide poor or inconsistent
baking results.

6. Be careful when placing oven. DO NOT

pinch the wiring between the oven back or
wall and the inner cabinet wall or floor.

WARNING!

Securely fasten oven to cabinet using the screws
provided. Failure to do so could result in oven moving
or tipping during use and causing damage to the oven
or cabinets or personal injury. Screws should be
inserted through the mounting holes in positions
indicated in frame (open door to see frame and
mounting holes). Do not overtighten screws

This manual is related to the following products: