Kleenmaid TO900X - Manual (Page 20)

19
Problem Solving
Ovens may exhibit problems that are unrelated to a malfunction of the oven itself. Service calls for
such items, not covered by warranty, must be paid for by you. The following may serve to answer
your questions about a problem you are having.
PROBLEM POSSIBLE CAUSE SUGGESTION(S)
A household fuse may have blown
or circuit Replace fuse or reset circuit breaker. Nothing
works
Power supply connections are
loose. Have qualified electrician check
connections.
The Function Selector is in Off
position Turn the function selector to a cooking
function. The oven
will not heat
The Temperature knob of the oven
is not turned up to a temperature. Set the Temperature knob to temperature
desired
Clock
displays
incorrect
time of day Time of day not properly set. See section of this manual headed Setting
Electronic Timer and Programming the
Oven on page 9.
The oven is not levelled. Level oven. See Installation Instructions.
Oven temperature calibration
differs from your previous oven. The calibration of your old oven may have
drifted gradually over time, while your new
oven is more exact. Adjust oven
temperature settings as needed.
The oven was not preheated
before baking. Preheat oven when recipe calls for
preheated oven.
Incorrect cooking time, temperature
or rack position being used.
The recipe has not been tested or
is not from a reliable source.
Use only tested recipes from a reliable
source.
The pan is not the correct type or
size. Refer to a reliable cookbook or recipe for
recommended pan size.
Cooking
results are
not what
was
expected
Browning or baking results are not
like they used to be in the former
oven. Change temperature settings in convection
bake as described on page 5 of this manual
and increase baking time accordingly.
Oven is in SELF-CLEAN and the
oven temperature is above 290°C. Wait for oven to finish and cool down. Door will
not open
Oven has finished SELF-CLEAN
but oven temperature is still above
290°C. Wait for oven to cool.
Light bulb is burned out. Replace bulb as described in this manual in
section titled Replacing an Oven Light. Oven
light(s) will
not work
.
Oven is operating in SELF-CLEAN. Lights do not come on in SELF-CLEAN.
Table 2.