Kleenmaid FEG605X - Manual (Page 34)

34
BURNERS
They can be removed and washed only
with soapy water.
Detergents can be used but must not be
abrasive or corrosive.
Do not use abrasive sponges or pads.
Do not put in dishwasher.
After each cleaning, make sure that the
burner-caps, as well as the burners,
have been well wiped off and COR-
RECTLY POSITIONED.
GAS TAPS
If the gas taps are not working proper-
ly, call our Customer Service Centre to
obtain the nearest Authorized Service
Agent.
CORRECT REPLACEMENT
OF THE BURNERS
It is essential to check that the burner
flame distributor F and the cap C has
been correctly positioned (see figs. 29-
30) - failure to do so can cause serious
problems.
Check that the electrode S (fig. 29) is
always clean to ensure trouble-free
sparking.
Check that the probe T (fig. 29) next to
each burner is always clean to ensure
correct operation of the safety valves.
Both the probe and ignition plug must
be very carefully cleaned.
Note:
T h e e l e c t r o d e S m u s t b e v e r y
carefully cleaned. To avoid damage
to the electric ignition do not use it
when the burners are not in place.
Figure 29 Figure 30
F
C
S
T