Kleenmaid FEG605X - Manual (Page 28)

28
ELECTRONIC CLOCK
(fig. 22)
The programmer is provided with an electronic clock with luminous figures showing
the hour and minutes.
The first time the oven is connected up to the electricity supply and after a power cut,
three zeroes will flash on the programmer display. To adjust the time, the two buttons
and must be pressed simultaneously and at the same time button or
until the correct time is set (Fig. 22). Setting speed automatically increases if you keep
the setting buttons pressed.
NORMAL COOKING WITHOUT THE USE OF THE PROGRAMMER
To use the oven manually, i.e. without the programmer, you must cancel the flashing
AUTO by pressing the two buttons
(the word AUTO will go out and the symbol
will come on).
Caution: If the word AUTO is not flashing (which means that a cooking program has
already been set) by pressing button
you will cancel the program and switch to
manual.
If the oven is on, you must switch it off manually.
Figure 23 Figure 22