Electronic timer – Kleenmaid FEG605X User Manual
Page 29
29
ELECTRONIC TIMER
The minute counter function consists simply of an acoustic signal which can be set for
a maximum of 23 hours 59 minutes. If the word AUTO is flashing, press the two but-
tons
.
To set the time, press button
and then button
or
until the required time
appears on the display (Fig. 24).
Once setting is complete, the clock time will reappear on the display and the symbol
will come on.
Countdown will begin immediately and can be seen on the display at any time by sim-
ply pressing button
.
When the time expires, the symbol
will go out and an intermittent acoustic signal
will come on which can be switched off by pressing any of the buttons.
Figure 24