beautypg.com

Automatic cooking – Kleenmaid FEG605X User Manual

Page 31

background image

31

AUTOMATIC COOKING

(Fig. 27 - 28)

To cook in the oven in automatic mode follow the instructions below:

1. Set the cooking time
2. Set the end of cooking time
3. Set the cooking temperature and function

These operations are carried out as follows:

1. Set the cooking time by pressing button

and then

to move forward or

to

move back if you have gone beyond the required time.
The word AUTO and the symbol

will appear.

2. Press button

; the cooking time already added to the clock time will appear.

Set the end of cooking time by pressing button

; if you go beyond the required

time, you can go back by pressing button

.

The symbol

will then go out.

If the word AUTO then begins to flash on the display and the acoustic signal comes
on, this indicates a programming error, i.e. the cooking cycle has been superim-
posed on the clock time. In this case alter the end of cooking time or the cooking
time as above.

3. Set the cooking temperature and function via the function selector and thermostat

knob (see specific chapters). The oven is now programmed and everything will work
automatically; the oven will come on as required and finish cooking at the pro-
grammed time.

During cooking the symbol

remains on; by pressing button

the remaining time

can be displayed.
The cooking program can be cancelled at any time by pressing the two buttons

.

Once the cooking time has elapsed, the oven will switch off automatically, the symbol

will go out, the word AUTO will flash and an acoustic signal will come on which

can be switched off by pressing any of the buttons.

Reset the function selector and thermostat knob and then set the programmer to man-
ual by pressing the two buttons

.

Caution: If the electricity supply is cut off (the display numbers will flash), the clock will
reset and all the programs entered will be cancelled.

A

Figure 27

Figure 28