Kleenmaid CH605CE - Manual (Page 5)

Instructions for use, mounting and connection 5
Installation diagram Connection may be carried out by means of:
−
rubber coated connection cables, model H05
RR-F 4x1,5 with yellow-green earthing cable;
−
PVC insulated connection cables, model H05
VV-F 4x1,5 with yellow-green earthing cable; or
any other suitable cables.
Mounting the built-in cooktop
Caution !
•
To avoid any possible hazard, the appliance
must be installed by qualified personnel only.
•
The kitchen cabinet into which the cooking hob
is to be installed must be treated with
temperature resistant adhesives (100°C), or
else they may discolour or distort because of
incorrect temperature resistance.
•
The cooking hob is intended for building into a
worktop of 60cm width or more above the
kitchen cabinetry.
•
After installation of the built-in hob ensure that
there is free access to the two fixing elements
in front.
•
The distance between the worktop and the
hood must be at least as indicated in the
instructions for installation of the kitchen hood,
but in no case should it be less than 650 mm.
•
The smallest distance between the edge of the
appliance and the adjacent high kitchen cabinet
is 40 mm.
•
The use of hard wood decorative borders
around the worktop behind the appliance is
allowed. The minimum distance remains as
indicated on the installation illustrations.
•
Minimum distance between the built-in cooktop
and rear wall is indicated in the illustration for
the installation of the built-in cooktop.
•
The appliance may be installed in any worktop
with a thickness from 30 mm to 50 mm.
Dimensions of the built-in hob opening Installation procedure
•
Worktop must be placed absolutely horizontal.
•
Suitably protect the edges of the cutout.
•
Fasten the supplied tightening brackets (4 or 6
according to the model) with the supplied
screws (4 or 6 according to the model). Fasten
to the front and the rear side of the cooking hob
and to the prepared cutout.
•
Connect the cooking hob to the mains power
supply (see instructions for the connection of
the cooking hob to mains power supply).
•
Insert the hob into the cutout.
•
Press the hob firmly towards the worktop from
above.