Kleenmaid CH605CE - Manual (Page 14)

Instructions for use, mounting and connection 14
Limited time of operation
This function is incorporated for safer operation of
your hob. Each hotplate is equipped with the time
limit switch. The period of operation is calculated
in accordance with the last selected power setting
of a particular hotplate.
If the power setting is not changed for a while, the
hotplate will be switched off automatically after a
certain period of time, depending upon the power
setting level (higher power setting – shorter time -
see chart).
Safety functions and error display
If both the (+) and (-) sensor are preset together
the hotplate is switched off.
If all the hotplates indicate the "0" power setting,
the hob is switched off after 10 seconds.
If any of the sensors is activated for more than 10
seconds the hob is switched off, the beep
sounds, and the indicator displays the flashing
"F" signal.
If the sensors are covered with an object, or the
surface is covered with spilt liquid, the hob is
switched off.
Error may occur also during the period of initial
synchronisation or during the operation. In such
cases the display indicates relevant combination
of symbols. If the fault can not be removed, call
the after sale assistance.
In case an error occurs during the operation, the
hob is automatically switched off. Flashing "F"
appears on the indicator relevant to the hotplate
where the error occurred. The sound signal is
repeated at 30 second intervals for a period of 15
minutes when it goes off automatically.
Power setting Maximum operation
time in hrs
1 10
2 5
3 5
4 4
5 3
6 2
7 2
8 2
9 1