Kleenmaid CH605CE - Manual (Page 12)

Instructions for use, mounting and connection 12
Switching the hotplate off
Individual hotplates are switched off either by
pressing the sensor (-) to bring the heating power
to "0", or by simultaneously pressing both the (+)
and (-) sensor. Hotplate is switched off
automatically after the set timer period elapses.
Display indicates "0" for a short time, then the
hotplate is switched off and the indicator displays
the remaining heat "H".
Remaining heat display
Immediately after a particular hotplate is switched
off, or in case the complete hob is switched off,
the indicator shows the letter "H" as a warning
that the "hotplate is hot". The period of this
warning signal is calculated in accordance with
the working time and the power setting of the
hotplate. When the warning signal is on do not
touch the hotplate or place any temperature
sensitive objects on the relevant hotplate. Danger
of burns!
When the indicator goes off, the hotplate surface
is cool enough to be touched safely.
In case of mains interruption, the warning signal
»H« reappears when the power comes back, and
remains displayed until the calculated time from
the last appearance has expired. It is therefore
possible that the "H" indication is still on if the
power failure took long time, although the
hotplate is completely cold, but it may also be still
hot in case the power failed for only a short
period.
Switching the complete hob off
The hob is switched off by pressing the main
ON/OFF sensor. The sound signal beeps and all
indicators go off, except for those hotplates which
are still hot and display the warning "H" sign as
an indication of the remaining heat. When all
hotplates indicate power level "0", or when this is
the result of the preset timer operation, the
complete hob is switched off after a 10 second
lapse, with only the remaining heat warning "H"
still illuminated.