Kemppi Protig 410 - Manual (Page 23)

EN
The parameters which are shown last in display and welded or stored last are kept in storage,
though electricity would be disconnected from unit. At connection electricity is restored to
the channel, on which you were last. All channels have reference values which don`t disappear
from memory though you would store to channnels anything. You can cancel program of
channel from memory as follows:
1. Select channel number to display CH.
2. Press at the same time both arrow keys. All lights on panel are lighted at the same time
and the program is cancelled and original reference values are restored to channel.
4. ACCURACY OF PANEL DISPLAY
Accuracy of digital meters in TL and TX panels as follows: Accuracy of current set value in ratio
to true value is ±2,5 %, ±2 A.
5. REMOTE CONTROL UNIT
R10
R20
R10F
Control of welding current min. – max.
Control of welding current min. – max.
No operation
Foot pedal control unit for TIG welding
• Start operation
• Control for welding current with movement on pedal
• Limiting of welding current range with min. and max. potentiometers
(reference scale 1 – 10).
21
Pr
oT
ig 410 H
yundai / © Kemppi O
y / 1135